| Item | Unit | U3020 | |
| Travels | |||
| Gantry frame moves forward and backward X-axis | mm | 2000 | |
| Main shaft slide moves left and right Y-axis | mm | 3000 | |
| Up and down travel direction of spindle Z axis | mm | 1000 | |
| AVCaxis positioning(VD13441) | 8 | ||
| A/C axis repeatability(VD13441) | 4 | ||
| Worktable | |||
| Worktable size | mm | 2000*3000 | |
| Distance from spindle end to worktable | mm | 450-1450 | |
| Worktable T-slots(No.-W+distance) | mm | 9-22*200 | |
| Max.weight on worktable | T/m² | 7 | |
| Gantry width | mm | 3700 | |
| Spindle | |||
| Spindle specification | HSK-A63 | ||
| Spindle drive | electric spindle | ||
| Y connection | △connection | ||
| Spindle speed | rpm | 3280 | 6000 |
| Maximum spindle speed | rpm | 8000 | 20000 |
| Spindle power | kw | 11 | 15 |
| precision VD13441 (JISB6338) | |||
| Positioning | mm | P0.03(±0.004/300) | |
| Repeatability | mm | Ps0.028(±0.003) | |
| Basic parameters | |||
| Spindle power | kw | 3.7/6.3 | |
| A/Caxis rotation angle | ±110/±360 | ||
| A/Caxis maximum speed | rpm | 60 | |
| X-axis rail specification | 4 pieces of 4-5 rollers | ||
| Y-axis rail specification | 55 roller | ||
| Z-axis railspecification | 4 pieces of 4-5 rollers | ||
| Specification of X-axis ball screw | 6320 | ||
| Specification of Y-axis ball screw | 6320 | ||
| Specification ofZ-axis ball screw | 5010 | ||
| X-axis servo motor | kw | 4.0*2 | |
| Y-axis servo motor | kw | 7 | |
| Z-axis servo motor | kw | 7 | |
| Machine weight | T | 42 | |
| Dimension(L/W/h) | mm | 7565*5595*5306 | |
U3020 Gantry Machining Center
The machine tool is mainly composed of worktable, left and right bed, beam, carriage, hydraulic system, lubrication system, cooling and chip removal device, guide rail protection device, electrical control system and other components. Its structural type is beam movement. The left and right beds of the machine tools are installed on both sides of the workbench, and the beam is fixed on the left and right beds. The beam is equipped with a carriage and a double-swing milling head. The cross beam of the machine tool moves along the left and right bed rails along the front and rear X axes, the slide seat moves on the cross beam along the left and right Y axes, and the spindle box moves up and down Z axes on the slide seat.
