Machine Features

High-Rigidity Integral Bed: The machine bed features a robust, integral cast structure. Its optimized internal rib layout provides exceptional rigidity. The guide rails undergo medium-frequency quenching and precision grinding. Anti-stick-slip guide plates are applied to the sliding guide surfaces, ensuring optimal dynamic characteristics such as friction damping and preventing low-speed crawling.
High-Rigidity, High-Precision Spindle: The headstock employs a symmetrical design to ensure uniform thermal expansion, preventing any displacement of the spindle center. To further minimize thermal deformation, the headstock utilizes an oil bath circulating lubrication system. The spindle’s front end is supported by a robust three-bearing structure, incorporating bi-directional angular contact ball bearings, which significantly enhances both precision and rigidity. All gears within the headstock are precision-quenched and ground, guaranteeing accurate power transmission, low noise levels, and maintaining consistent accuracy during prolonged operation.

➡️Machine Specifications

ITEM	UNIT	CW61100B	CW61125B	CW61140B	CW61160B
CAPACITIES
Swing over bed	mm	1000	1250	1400	1640
Swing over carriage	mm	615	865	1015	1250
Max.length of workpiece	mm	1500 2000 3000 4000 5000 6000 8000 10000 12000
Max.turning length	mm	1300 1800 2800 3800 4800 5800 7800 9800 11800
Pan of guideway	mm	755
SPINDLE
Spindle nose	mm	A2-15(8×M22)
Spindle bore	mm	130
Taper hole of spindle		1:20/140
Range of spindle speeds	r/min	forward：3.15~315 ； reverse：3.5~291
No.of spindle speeds		forward：21； reverse：12
FEED
No.of Longitudinal and cross		56/56
Feed per revolution	mm	Longitudinal：0.1~12;cross:0.05~6;top slide:0.025~3
No. and range of metric thread		44;1~120mm
No. and range of inch thread		31;28~1/4
No. and range of module thread		45;0.5~60mm
No. and range of dia. thread		38;1/2~56DP
turret
Distance of centerline and tool resting plane	mm	48
Tool post swing range	°	±90°
Max. travel of cross slide	mm	520(20″）	580	580	630
Max. travel of top slide	mm	300
Section of tool shank	mm	45（260×260）
Rapid travel speeds	mm/min	Longitudinal:3740;cross:1870;Little slide:935
TAILSTOCK
Dia. of tailstock	mm	160(6″)
Travel of tailstock quill	mm	300(12″)
Taper hole of tailstock quill		morse 6
OTHERS
Main motor power	kw	22
Length	mm	4600 5100 6100 7100 8100 9100 11100 13100 15100
Width	mm	2150
Height	mm	1700 1825 2150
Max.weight of workpiece	kg	6000