- Imported high-speed and high-precision ball screws, good precision retention and rigidity.
- The crossbeam is directly connected to the screw through a high-power servo motor to ensure the precision of the machining contour without overcutting phenomenon.
- The left and right guide rail seat and worktable are separated, and the height of closure can be adjusted freely.
- Adopt rack and pinion drive for 8 meters and above travel, synchronized dual drive four motor isotropic differential backlash movement structure
- Small footprint, 60% of the same specifications of the table mobile gantry
- The use of self-developed composite guide technology to lengthen the cutting resistance moment and bearing area, to enhance cutting resistance
- The table bearing large, theoretically not subject to weight limitations
CMS split type 25, thirty and above series
| parameters | Unit | CMS4025 | CMS6025 | CMS6030 | CMS8030 | CMSXXX35 |
| Worktable | mm | 2100×4000 | 2100×6000 | 2600×6000 | 2600×8000 | 3100xXXX |
| Max worktable loading | t | 30 | 40 | 50 | 65 | / |
| X/Y/Z travel | mm | 4950x2500x1200 | 6950x2500x1200 | 6950x3000x1200 | 8950x3000x1200 | / |
| Dist.from spindle nose to table | mm | 350-1550（customizable） | ||||
| Max loading height x width | mm | 1500（customizable）x3160
| 1500（customizable）x3600 | |||
| Rapid/feeding speed | m/min | 20/0-15 | ||||
| Positioning/repeat accuracy | mm | 0.01/0.005 | ||||
| Weight of machine | t | 60 | 75 | 78 | 102 | / |
| Dimension (without electrical cabinet) | mm | 9080x6320x5750 | 11080x6320x5750 | 12020x6820x5750 | 13020x6820x5750 | / |
| Control system | Siemens 828D、Fanuc MF plus，Siemens ONE | |||||
| technical parameter | unit | CMSforty25 | CMSsixty25 | CMS6030 | CMS8030 | CMSXX335 |
| Workbench area | Mm | 2100 × 4000 | 2100 × 6000 | 2600 × 6000 | 2600 × 8000 | 3100 × XXX |
| Maximum load capacity of workbench | t | 30 | 40 | fifty | sixty-five | / |
| Travel in X/Y/Z direction | Mm | 4950 x 2500 x 1200 | 6950 x 2500 x 1200 | 6950 x 3000 x 1200 | 8950 x 3000 x 1200 | / |
| Guide rail form | X: Two parallel four track tracks on each side, Y: two track tracks supported by hard tracks vertically distributed, Z: four roller track tracks distributed in four directions | |||||
| Spindle end face to worktable | Mm | 350-1550 (customizable) | ||||
| Mechanical belt spindle can be installed And motor | Standard belt BT50-190-6000, optional+dual speed gearbox (BT50-190-8000) | |||||
| Siemens 28/42kw (rated 1000rpm) 267.5/401Nm (optional+ZF gearbox 1070/1604Nm) | ||||||
| Spindle optional transmission mode | Built in short direct connection BT50-190-6000, optional+dual speed gearbox | |||||
| Maximum loading height x width | Mm | 1500 (customizable) x 31601500 (customizable) x 3600 | ||||
| Rapid movement/feed rate | M/min | 20/0-1530/0-15 | ||||
| Positioning/Repetitive positioning accuracy | Mm | 0.01/0.005 | ||||
| Overall weight | t | 60 | seventy-five | 78 | one hundred and two | / |
| External dimensions (excluding electrical cabinets) | Mm | 9080 × 6320 × 5750 | 11080 × 6320 × 5750 | 12020 × 6820 × 5750 | 13020 × 6820 × 5750 | / |
| Typical configuration of CNC system | Standard Siemens 828D, Fanuc MF plus, optional Siemens 840Dsl | |||||
