In Ma’anshan in July, the sun is scorching, and the high temperature for many consecutive days has brought the outdoor temperature to 38℃. On the afternoon of July 24, Mr. Qiao Yongliang, general manager of the company, led a team of the project team to Ma’anshan production base in the scorching sun, delivering heat prevention and cooling materials to employees who are on the front line, and in-depth research on the latest machine tool production situation in the production workshop. “Thank you all for your hard work! You must pay attention to preventing heat and arrange your rest time reasonably.” As soon as you walked into the factory gate, General Manager Qiao Yongliang said, holding the hand of Master Wang, an employee of the assembly workshop.
Seeing that the newly installed ventilation and cooling equipment in the workshop was operating stably, he specifically urged the factory manager: “In high temperature days, the health of employees is the first priority. We must ensure that the cooling facilities operate normally 24 hours a day, adjust the operating shifts reasonably, avoid the high temperatures at noon, and do not let everyone bear it in a stuffy environment.”
After the condolences, General Manager Qiao Yongliang walked straight into the production workshop. The workers were busy in an orderly manner amid the roar of the machine running. In front of the bending machine assembly line, technical supervisor Mr. Li was leading the team to debug a WCY67Y CNC bending machine that is about to be offline.
After the condolences, General Manager Qiao Yongliang walked straight into the production workshop. The workers were busy in an orderly manner amid the roar of the machine running. In front of the bending machine assembly line, technical supervisor Mr. Li was leading the team to debug a WCY67Y CNC bending machine that is about to be offline.
This equipment is a “technical master” – it is equipped with a CNC system independently developed by the company, which can achieve intelligent positioning, accurate positioning of the back gear material, and a material withdrawal system that can flexibly avoid processing interference. The one-way and two-way positioning functions meet the processing needs of complex workpieces. At the same time, it is also equipped with a torque synchronization control system, allowing the movement of the swing rod to always be parallel to the workbench, ensuring the stability of bending at the root. The independently developed deformation compensation device solves the industry problem of easy deformation of thick plates when bending. This equipment is about to be sent to an Italian auto parts company and is an important order for the company to expand its European market.
(Mr. Qiao conducts machine parameters docking with sales staff and factory technicians)
(The technical director communicates with the workshop technician to communicate the details of the machine tool)
Director Zhou, the company’s technical director, carefully asked the workshop manager Li Gong about the detailed parameters of the equipment: “How much can the bending accuracy be stable? Is the error range during continuous operation exceeding the standard?
“Mr. Li took out the debugging records and responded one by one: “After multiple tests, the angle error can be controlled within ±0.5°, which can fully meet the processing accuracy required by customers. All performance indicators meet the export standards. “Director Zhou nodded, pointed to the hydraulic system of the equipment and added: “The operation data of core components must be kept in a closer look, and the export equipment must be kept in good terms. ”
In the bending machine assembly area, General Manager Qiao Yongliang noticed that the workers were installing safety protection devices. He stopped, looked at the closing process of the protective door, and said seriously: “The protective device of the equipment must be strictly implemented in accordance with international standards. The protective device is the greatest guarantee for workers, and it is necessary to ensure a 100% pass rate.”
Then, he turned to the technician and asked about the adaptation of the equipment’s programming simulation system. The technician immediately demonstrated on the operating screen: after entering the parameters, the system generated a complete bend path simulation in just 5 seconds, and also automatically generated the program, making the whole process smooth and efficient. General Manager Qiao finished reading the demonstration and put forward optimization suggestions: “This response speed is good, but the actual operation scenarios of the customers must also be considered. For example, Russian customers may need more Russian interfaces, and the Russian interface can be added in the future, so that customers from different countries can use it more easily.
“We then learned about the progress of several equipment to be exported recently, and learned that the shearing machines for German customers have been completed in the final assembly, and the laser cutting machines ordered by Brazil have entered the debugging stage. General Manager Qiao asked to keep a close eye on the quality inspection process and ensure that they are delivered on time.
At the end of the investigation, General Manager Qiao Yongliang held a brief on-site meeting in the temporary lounge area built in the workshop. He looked at the densely marked “Delivery Progress Schedule for the Third Quarter of 2025” on the wall, and said firmly: “Although the weather is hot, we cannot slack off.
Currently, we have orders for multiple export equipment, and the delivery time has been scheduled to September. Each equipment is related to the company’s reputation. We must grasp the construction period. No details can be missed by machine tool manufacturing. Just like the bending machines we produce, we must ensure the accuracy of each bending angle, the blade gap of the shearing machine must be correct, and the tightness of any screw and the arrangement of a line may affect the service life of the equipment and the reputation of customers. What we are doing is precision equipment, so we must have a ‘finger-picking’ attitude.”
As the convoy drove away from the factory, the roar in the workshop was still loud. Perseverance in high temperatures and seriousness in details are allowing “Made in China” machine tools to move towards a broader world with responsibility and quality.
