The product adopts a vertical layout and an inverted structure as a whole, with six – axis numerical control. Both the tool spindle and the workpiece spindle are directly driven by built – in spindle motors. Below the processing area is a chip removal device. The processing iron chips directly fall into the chip removal groove to take away the processing heat, and the processing heat has little impact on the thermal deformation of the machine tool.
The workpiece spindle uses a hydraulic fixture to clamp the workpiece. At the same time, the workpiece spindle can use a cross – guide structure to directly discharge and pick up materials from the tray, realizing the function of automatic loading and unloading.
Technical Parameters
| Parameter | Specification |
|---|---|
| Maximum clamping outer diameter | Φ300mm |
| Minimum machining inner diameter | Φ80mm |
| Maximum machining module | 4mm |
| Maximum machining tooth width | 100mm |
| Workpiece helix angle | ±30° |
