| A | Spindle | |
| Spindle diameter | 110/130/160mm | |
| Spindle taper | ISO50 | |
| Shank specification | JT50 | |
| Pull stud | BT50 | |
| Max. Spindle speed | 1200rpm (Op: 2000/3000rpm) | |
| B | Structure data | |
| Motor power-Servo-Siemens | 37/51（Kw） | |
| Ram section size | 380×420/480×520 | |
| Table size | 2000X1800mm(or any other size) | |
| Table loading capacity | 15ton | |
| Max spindle torque | 2500Nm | |
| Max spindle thrust | 20000N | |
| C | Working range | |
| Cross travel of table X | 2000 to 6000mm | |
| Vertical travel of spindle head Y | 1500 to 4000 mm | |
| Longitude travel of column V | 1000 to 2500mm | |
| Axial travel of ram W | 800/1200mm | |
| Axial travel of boring spindle Z | 700/1200mm | |
| Table rotary tavel B | 360°（Radom） 0.001° | |
| D | Feed range | |
| X、Y | 1-3000mm/min | |
| W轴angemle headletionand chip conveyor are availableoil coolant circul | 1-2000mm/min | |
| Z | 1-2000mm/min | |
| B | 0.003-1r/min | |
| E | Rapid movement | |
| X、Y | 6000mm/min | |
| W、Z | 5000mm/min | |
| V | 4000mm/min | |
| B | 1.5r/min | |
| F | Positioning accuracy | |
| X、Y、Z | ±0.025mm | |
| B | 8″ | |
| Repeatability | ||
| X、Y | ±0.02mm | |
| Z | ±0.02mm | |
| B | 6″ | |
