இயந்திர விவரக்குறிப்பு
| சுழல் (C-axis) output torque | > 4500என். எம் |
| சுழல் வேகம் | 0-15ஆர்பிஎம் |
| The diameter of the spindle through hole(3 sets whirling head ) | φ130mm、φ180mm、φ250mm |
| The range of processing diameter | φ25mm -200mm |
| The effective processing length | ＜3000mm |
| Z-axis output torque | > 45என். எம் |
| X-axis output torque | > 25என். எம் |
| Processing accuracy (aspect ratio within 40) | P5 (Italy or
Germany material) |
Configuration Machine Components
| Serial number | பெயர் | Supplier manufacturer |
|---|---|---|
| 1 | கட்டுப்பாட்டு அமைப்பு | சீமென்ஸ் |
| 2 | சுழல் தாங்கி | Germany FAG or SKF |
| 3 | சுழல் தாங்கி | NSK |
| 4 | Ball screw | Spain IPIRANGA |
| 5 | Spindle and Z-axis reduction servo motor |
சீமென்ஸ் |
| 6 | Spindle rotary encoder | Renishaw, United Kingdom |
| 7 | எக்ஸ், Z axis grating | Spain Fage |
| 8 | Hydraulic control | Haimen Dongzhou |
| 9 | Servo jacking mechanism | Shanghai Lianheng |
| 10 | சுழல் மோட்டார் | சீமென்ஸ் |
| 11 | Matching sleeve | Humberg |
Ball Screws Technical Information
| Serial Number | Acceptance project | Accuracy requirements |
| 1 | Spindle axial movement | ≤ 0.003mm |
|
2 |
Spindle radial run-out | ≤ 0.005mm |
| 3 | Concentricity between the center of the center jaw and the center of the spindle |
≤ 0.008mm |
| 4 | Concentricity of the cutter head center and the spindle center |
≤ 0.005mm |
| 5 | Straightness in the vertical plane of the guide rail | ≤ 0.005mm/1000 |
| 6 | Straightness in the vertical plane of the guide rail | ≤ 0.025mm/total length |
| 7 | Straightness in the horizontal plane of the guide rail | ≤ 0.005mm/1000 |
| 8 | Straightness in the horizontal plane of the guide rail | ≤ 0.025mm/total length |
| 9 | Parallelism of two rails per meter | ≤ 0.005mm |
| 10 | The parallelism between the spindle center and the guide rail is at a distance of 300mm |
≤ 0.01mm |
| 11 | Servo-electric cylinder repeat positioning accuracy | ≤ 0.03 |
| 12 | Processing accuracy GB/T17587.3 | P5 (aspect ratio less than 1:40) |
விண்ணப்பம்
